性能监控方面的一些SQL语句

性能监控之监控SQL语句
分析表
analyze table tablename compute statistics for all indexes;
analyze table tablename compute statistics for all indexed columns;
analyze table tablename compute statistics for table;
监控事例的等待
select event,sum(decode(wait_Time,0,0,1)) "Prev",
sum(decode(wait_Time,0,1,0)) "Curr",count(*) "Tot"
from v$session_Wait
group by event order by 4;
查看碎片程度高的表
SELECT segment_name table_name , COUNT(*) extents
FROM DBA_segments WHERE owner NOT IN (SYS, SYSTEM) GROUP BY segment_name
HAVING COUNT(*) = (SELECT MAX( COUNT(*) FROM dba_segments GROUP BY segment_name);
表、索引的存储情况检查
select segment_name,sum(bytes),count(*) ext_quan from dba_extents where
tablespace_name=&tablespace_name and segment_type=TABLE group by tablespace_name,segment_name;
select segment_name,count(*) from dba_extents where segment_type=INDEX and owner=&owner
group by segment_name;
找使用CPU多的用户session
cpu used by this session
select a.sid,spid,status,substr(a.program,1,40) prog,a.terminal,osuser,value/60/100 value
from v$session a,v$process b,v$sesstat c
where c.statistic#=12 and c.sid=a.sid and a.paddr=b.addr order by value desc;
监控表空间的 I/O 比例
select df.tablespace_name name,df.file_name "file",f.phyrds pyr,
f.phyblkrd pbr,f.phywrts pyw, f.phyblkwrt pbw
from v$filestat f, dba_data_files df
where f.file# = df.file_id
order by df.tablespace_name;

回滚段的争用情况
select name, waits, gets, waits/gets "Ratio"
from v$rollstat a, v$rollname b
where a.usn = b.usn;
在某个用户下找所有的索引
select user_indexes.table_name, user_indexes.index_name,uniqueness, column_name
from user_ind_columns, user_indexes
where user_ind_columns.index_name = user_indexes.index_name
and user_ind_columns.table_name = user_indexes.table_name
order by user_indexes.table_type, user_indexes.table_name,
user_indexes.index_name, column_position;

监控文件系统的 I/O 比例
select substr(a.file#,1,2) "#", substr(a.name,1,30) "Name",
a.status, a.bytes, b.phyrds, b.phywrts
from v$datafile a, v$filestat b
where a.file# = b.file#;
监控 SGA 中字典缓冲区的命中率
select parameter, gets,Getmisses , getmisses/(gets+getmisses)*100 "miss ratio",
(1-(sum(getmisses)/ (sum(gets)+sum(getmisses))))*100 "Hit ratio"
from v$rowcache
where gets+getmisses <>0
group by parameter, gets, getmisses;
监控 SGA 中共享缓存区的命中率,应该小于1%
select sum(pins) "Total Pins", sum(reloads) "Total Reloads",
sum(reloads)/sum(pins) *100 libcache
from v$librarycache;
select sum(pinhits-reloads)/sum(pins) "hit radio",sum(reloads)/sum(pins) "reload percent"
from v$librarycache;
监控 SGA 的命中率
select a.value + b.value "logical_reads", c.value "phys_reads",
round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"
from v$sysstat a, v$sysstat b, v$sysstat c
where a.statistic# = 38 and b.statistic# = 39
and c.statistic# = 40;
监控 SGA 中重做日志缓存区的命中率,应该小于1%
SELECT name, gets, misses, immediate_gets, immediate_misses,
Decode(gets,0,0,misses/gets*100) ratio1,
Decode(immediate_gets+immediate_misses,0,0,
immediate_misses/(immediate_gets+immediate_misses)*100) ratio2
FROM v$latch WHERE name IN (redo allocation, redo copy);
显示所有数据库对象的类别和大小
select count(name) num_instances ,type ,sum(source_size) source_size ,
sum(parsed_size) parsed_size ,sum(code_size) code_size ,sum(error_size) error_size,
sum(source_size) +sum(parsed_size) +sum(code_size) +sum(error_size) size_required
from dba_object_size
group by type order by 2;
监控内存和硬盘的排序比率,最好使它小于 .10,增加 sort_area_size
SELECT name, value FROM v$sysstat WHERE name IN (sorts (memory), sorts (disk));

监控当前数据库谁在运行什么SQL语句
SELECT osuser, username, sql_text from v$session a, v$sqltext b
where a.sql_address =b.address order by address, piece;
监控字典缓冲区
SELECT (SUM(PINS - RELOADS)) / SUM(PINS) "LIB CACHE" FROM V$LIBRARYCACHE;
SELECT (SUM(GETS - GETMISSES - USAGE - FIXED)) / SUM(GETS) "ROW CACHE" FROM V$ROWCACHE;
SELECT SUM(PINS) "EXECUTIONS", SUM(RELOADS) "CACHE MISSES WHILE EXECUTING" FROM V$LIBRARYCACHE;
后者除以前者,此比率小于1%,接近0%为好。
SELECT SUM(GETS) "DICTIONARY GETS",SUM(GETMISSES) "DICTIONARY CACHE GET MISSES"
FROM V$ROWCACHE
监控 MTS
select busy/(busy+idle) "shared servers busy" from v$dispatcher;
此值大于0.5时,参数需加大
select sum(wait)/sum(totalq) "dispatcher waits" from v$queue where type=dispatcher;
select count(*) from v$dispatcher;
select servers_highwater from v$mts;
servers_highwater接近mts_max_servers时,参数需加大
碎片程度
select tablespace_name,count(tablespace_name) from dba_free_space group by tablespace_name
having count(tablespace_name)>10;
alter tablespace name coalesce;
alter table name deallocate unused;
create or replace view ts_blocks_v as
select tablespace_name,block_id,bytes,blocks,free space segment_name from dba_free_space
union all
select tablespace_name,block_id,bytes,blocks,segment_name from dba_extents;
select * from ts_blocks_v;
select tablespace_name,sum(bytes),max(bytes),count(block_id) from dba_free_space
group by tablespace_name;
标签: 暂无标签
oraunix

写了 199 篇文章,拥有财富 1026,被 339 人关注

转播转播 分享分享 分享淘帖
回复

使用道具

P4 | 发表于 2010-11-16 20:57:00
SELECT segment_name table_name , COUNT(*) extents
FROM dba_segments WHERE owner NOT IN (SYS, SYSTEM) GROUP BY segment_name
HAVING COUNT(*) = (SELECT MAX( COUNT(*) FROM dba_segments GROUP BY segment_name);
这个结果并不能反应表的碎片程度吧,如果表本身就很大那自然extents就多。
回复

使用道具

您需要登录后才可以回帖 登录 | 加入社区

本版积分规则

意见
反馈